We report on the optical properties of thin titanium suboxide (TiO x ) films for applications in laser transmission welding of polymers. Non-absorbing fibers were coated with TiO x coatings by reactive magnetron sputtering. Plasma process parameters influencing the chemical composition and morphology of the deposited thin films were investigated in order to optimize their absorption properties. Optical absorption spectroscopy showed that the oxygen content of the TiO x coatings is the main parameter influencing the optical absorbance. Overtreatment (high power plasma input) of the fiber surface leads to high surface roughness and loss of mechanical stability of the fiber. The study shows that thin substoichiometric TiO x films enable the welding of very thin polyurethane membranes and polyamide fibers with improved adhesion properties.Metal-organic frameworks (MOFs) have attracted considerable attention for various applications due to their tunable structure, porosity and functionality. In general, MOFs have been synthesized from isolated metal ions and organic linkers under hydrothermal or solvothermal conditions via one-spot reactions. The emerging precursor approach and kinetically tuned dimensional augmentation strategy add more diversity to this field. In addition, to speed up the crystallization process and create uniform crystals with reduced size, many alternative synthesis routes have been explored. Recent advances in microwave-assisted synthesis and electrochemical synthesis are presented in this review. In recent years, post-synthetic approaches have been shown to be powerful tools to synthesize MOFs with modified functionality, which cannot be attained via de novo synthesis. In this review, some current accomplishments of post-synthetic modification (PSM) based on covalent transformations and coordinative interactions as well as post-synthetic exchange (PSE) in robust MOFs are provided.Mesoporous solids, which were prepared from inorganic-surfactant mesostructured materials, have been investigated due to their very large surface area and high porosity, pore size uniformity and variation, periodic pore arrangement and possible pore surface modification. Morphosyntheses from macroscopic morphologies such as bulk monolith and films, to nanoscopic ones, nanoparticles and their stable suspension, make mesoporous materials more attractive for applications and detailed characterization. This class of materials has been studied for such applications as adsorbents and catalysts, and later on, for optical, electronic, environmental and bio-related ones. This review summarizes the studies on the chemistry of mesoporous silica and functional guest species (host-guest chemistry) to highlight the present status and future applications of the host-guest hybrids.Subtle disturbances of visual and motor function are known features of schizophrenia and can greatly impact quality of life; however, few studies investigate these abnormalities using simple visuomotor stimuli. In healthy people, electrophysiological data show that beta band oscillations in sensorimotor cortex decrease during movement execution (event-related beta desynchronisation (ERBD)), then increase above baseline for a short time after the movement (post-movement beta rebound (PMBR)); whilst in visual cortex, gamma oscillations are increased throughout stimulus presentation. In this study, we used a self-paced visuomotor paradigm and magnetoencephalography (MEG) to contrast these responses in patients with schizophrenia and control volunteers. We found significant reductions in the peak-to-peak change in amplitude from ERBD to PMBR in schizophrenia compared with controls. This effect was strongest in patients who made fewer movements, whereas beta was not modulated by movement in controls. There was no significant difference in the amplitude of visual gamma between patients and controls. These data demonstrate that clear abnormalities in basic sensorimotor processing in schizophrenia can be observed using a very simple MEG paradigm.The health and vigour of honeybee colonies are threatened by numerous parasites (such as Varroa destructor and Nosema spp.) and pathogens, including viruses, bacteria, protozoa. Among honeybee pathogens, viruses are one of the major threats to the health and well-being of honeybees and cause serious concern for researchers and beekeepers. To tone down the threats posed by these invasive organisms, a better understanding of bee viral infections will be of crucial importance in developing effective and environmentally benign disease control strategies. Here we summarize recent progress in the understanding of the morphology, genome organization, transmission, epidemiology and pathogenesis of eight honeybee viruses Deformed wing virus (DWV) and Kakugo virus (KV); Sacbrood virus (SBV); Black Queen cell virus (BQCV); Acute bee paralysis virus (ABPV); Kashmir bee virus (KBV); Israeli Acute Paralysis Virus (IAPV); Chronic bee paralysis virus (CBPV). The review has been designed to provide researchers in the field with updated information about honeybee viruses and to serve as a starting point for future research.The European legislation set the new hygiene standards in food chain with the purpose to ensure high levels of public health protection in relation to food production. In order to guarantee excellent hygiene standards in food chain, particular attention must be paid to the presence of foreign matter, like light solid impurities of mineral, vegetable or animal origin. The light filth test is a suitable method used to detect and count light solid impurities applicable to different foodstuffs. We report the results of the analysis of 93 foodstuffs official samples investigated for the presence of foreign matter at the Institute for Experimental Veterinary Medicine of Sardinia, from 2012 to 2013. Insect fragments were found in a sample of semolina and in a sample of canned tomato; plastic fragments were found in a sample of grated bread.This study presents a new approach for automated identification of ice hockey skating strides and a method to detect ice contact and swing phases of individual strides by quantifying vibrations in 3D acceleration data during the blade-ice interaction. The strides of a 30-m forward sprinting task, performed by 6 ice hockey players, were evaluated using a 3D accelerometer fixed to a hockey skate. Synchronized plantar pressure data were recorded as reference data. To determine the accuracy of the new method on a range of forward stride patterns for temporal skating events, estimated contact times and stride times for a sequence of 5 consecutive strides was validated. Bland-Altman limits of agreement (95%) between accelerometer and plantar pressure derived data were less than 0.019 s. Mean differences between the 2 capture methods were shown to be less than 1 ms for contact and stride time. These results demonstrate the validity of the novel approach to determine strides, ice contact, and swing phases during ice hockey skating. This technology is accurate, simple, effective, and allows for in-field ice hockey testing.When the rear- and forefoot are constrained, calcaneal plantar flexion may occur, deforming the longitudinal arch. click here Previous research has reported calcaneal motion relative to the tibia or forefoot; these joint rotations may not accurately describe rotation of the calcaneus alone. This investigation (1) characterized the calcaneus and leg segment and ankle joint rotations during stance in gait, and (2) described the range of calcaneal plantar flexion in different structural arch types. Men (n = 14) and women (n = 16) performed gait in a motion analysis laboratory. From heel strike to heel off, the leg rotated forward while the calcaneus plantar flexed. Before foot flat, calcaneal plantar flexion was greater than forward leg rotation, resulting in ankle plantar flexion. After foot flat, forward leg rotation was greater than calcaneal plantar flexion, resulting in ankle dorsiflexion. Structural arch type was classified using the longitudinal arch angle. The range of calcaneal plantar flexion from foot flat to heel off was small in low (-2° to -8°), moderate in high (-3° to -12°), and large in normal (-2° to -20°) structural arches. Calcaneal plantar flexion in gait during midstance may reflect functional arch characteristics, which vary depending on structural arch type.This study evaluates the between-day reliability of a newly developed trunk perturbation test and compares mechanical response during known and unknown conditions. Mechanical trunk responses were measured in 17 female subjects during unloading and loading perturbations of the abdomen (A preloaded abdomen condition) and low back (B preloaded back condition). The loading perturbation increased the preload from 5.5 kg to a 10.9 kg pull on the trunk whereas the unloading perturbation decreased the pull from 5.5 kg to 0.1 kg. A sequence of loading (known), unloading (known), and randomized loading/unloading (unknown) perturbations were performed for A and B. Between-day reliability of stopping time, trunk displacement, and velocity was quantified using intraclass correlation coefficients (ICCs). ICCs were good to excellent for all loading and unloading measures during the known (0.70-0.98) and unknown (0.64-0.94) perturbations of A and B. In general, larger trunk displacements were seen after the unknown perturbations compared with the known perturbation. The method may be used as a diagnostic tool for screening workers who are in risk of future work-related low back injuries.Performance during human movements is highly related to force and velocity muscle capacities. Those capacities are highly developed in elite athletes practicing power-oriented sports. However, it is still unclear whether the balance between their force and velocity-generating capacities constitutes an optimal profile. In this study, we aimed to determine the effect of elite sport background on the force-velocity relationship in the squat jump, and evaluate the level of optimization of these profiles. Ninety-five elite athletes in cycling, fencing, taekwondo, and athletic sprinting, and 15 control participants performed squat jumps in 7 loading conditions (range 0%-60% of the maximal load they were able to lift). Theoretical maximal power (Pm), force (F0), and velocity (v0) were determined from the individual force-velocity relationships. Optimal profiles were assessed by calculating the optimal force (F0th) and velocity (v0th). Athletic sprinters and cyclists produced greater force than the other groups (P less then .05). F0 was significantly lower than F0th, and v0 was significantly higher than v0th for female fencers and control participants, and for male athletics sprinters, fencers, and taekwondo practitioners (P less then .05). Our study shows that the chronic practice of an activity leads to differently balanced force-velocity profiles. Moreover, the differences between measured and optimal force-velocity profiles raise potential sources of performance improvement in elite athletes.The aims of the current study were to explore the pattern of the force-velocity (F-V) relationship of leg muscles, evaluate the reliability and concurrent validity of the obtained parameters, and explore the load associated changes in the muscle work and power output. Subjects performed maximum vertical countermovement jumps with a vest ranging 0-40% of their body mass. The ground reaction force and leg joint kinematics and kinetics were recorded. The data revealed a strong and approximately linear F-V relationship (individual correlation coefficients ranged from 0.78-0.93). The relationship slopes, F- and V-intercepts, and the calculated power were moderately to highly reliable (0.67 less then ICC less then 0.91), while the concurrent validity F- and V-intercepts, and power with respect to the directly measured values, was (on average) moderate. Despite that a load increase was associated with a decrease in both the countermovement depth and absolute power, the absolute work done increased, as well as the relative contribution of the knee work.